JOURNAL OF CHILEAN CHEMICAL SOCIETY

Vol 68 No 4 (2023): JCChemS
Original Research Papers

Silylated and germylated lineal polyesters obtained from a fatty alcohol, Undec-10-en-1-ol

PDF
  • Mohamed Dahrouch,
  • Ángelo Contreras,
  • Daniela Andrade,
  • Miguel Zarraga,
  • Hector Aguilar,
  • Nadia Katir
Mohamed Dahrouch
Universidad de Concepción
Published October 6, 2024
Keywords
  • Polyesters,
  • fatty alcohol,
  • polytransesterification
How to Cite
Dahrouch, M., Contreras, Ángelo, Andrade, D., Zarraga, M., Aguilar, H., & Katir, N. (2024). Silylated and germylated lineal polyesters obtained from a fatty alcohol, Undec-10-en-1-ol. Journal of the Chilean Chemical Society, 68(4), 6018-6024. Retrieved from https://jcchems.com/index.php/JCCHEMS/article/view/2550

Copyright (c) 2024 SChQ

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Abstract

Novel metaled fatty polyesters were prepared using polytransesterification reactions between dimethyl terephthalate (DMT) and different fatty metaled (Si/Ge) alcohol obtained from the undec-10-en-1-ol. The corresponding yields were excellent and the structure of the polyesters were determined by spectroscopic methods. Considering one hour of polymerization, the polymers exhibited acceptable molecular weights. The thermogravimetric analysis showed that these polyesters were more stable than their corresponding monomers and presented thermal degradation above 400°C.

 

2550.jpg

PDF

References

  1. F. Gonçalves, M. Santos, T. Cernadas, P. Ferreira, P. Alves, Advances in the development of biobased epoxy resins: insight into more sustainable materials and future applications, International Materials Reviews 67(2) (2022) 119-149.
  2. Y. Arun, R. Ghosh, A.J. Domb, Biodegradable Hydrophobic Injectable Polymers for Drug Delivery and Regenerative Medicine, Advanced Functional Materials 31(44) (2021) 1-22.
  3. G. Ramalingam, A.K. Priya, L. Gnanasekaran, S. Rajendran, T.K.A. Hoang, Biomass and waste derived silica, activated carbon and ammonia-based materials for energy-related applications - A review, Fuel 355 (2024) 1-18.
  4. E. Bari, A. Sistani, J.J. Morrell, A. Pizzi, M.R. Akbari, J. Ribera, Current Strategies for the Production of Sustainable Biopolymer Composites, Polymers 13(17) (2021) 1-15.
  5. P.F. Li, Y.W. Jia, P.K. Chen, Design and Synthesis of New Type of Macrocyclic Architectures Used for Optoelectronic Materials and Supramolecular Chemistry, Chemistry-a European Journal 29 (2023) 1-14.
  6. G.Q. Shao, D. Xu, Z.J. Xu, Y.M. Jin, F.F. Wu, N. Yang, X.M. Xu, Green and sustainable biomaterials: Edible bioplastic films from mushroom mycelium, Food Hydrocolloids 146 (2024) 1-9.
  7. F.P. La Mantia, M. Morreale, Green composites: A brief review, Composites Part a-Applied Science and Manufacturing 42(6) (2011) 579-588.
  8. P.P. Das, V. Chaudhary, Moving towards the era of bio fibre based polymer composites, Cleaner Engineering and Technology 4 (2021) 1-11.
  9. X.Y. Qi, Y.F. Hu, R.Y. Wang, Y.Q. Yang, Y.F. Zhao, Recent Advance of Machine Learning in Selecting New Materials, Acta Chimica Sinica 81(2) (2023) 158-174.
  10. S. Davoodi, M. Al-Shargabi, D.A. Wood, V.S. Rukavishnikov, Recent advances in polymers as additives for wellbore cementing applications: A review, Fuel 357 (2024) 1-25.
  11. H. Wang, Z. Meng, C.Y. Zhao, Y.H. Xiao, H. Zeng, H. Lian, R.Q. Guan, Y. Liu, Z.G. Feng, Q.Q. Han, Research progress of implantation materials and its biological evaluation, Biomedical Materials 18(6) (2023) 1-13.
  12. D. Jayanth, P.S. Kumar, G.C. Nayak, J.S. Kumar, S.K. Pal, R. Rajasekar, A Review on Biodegradable Polymeric Materials Striving Towards the Attainment of Green Environment, Journal of Polymers and the Environment 26(2) (2018) 838-865.
  13. M. Seydibeyoglu, A. Dogru, J.W. Wang, M. Rencheck, Y. Han, L. Wang, E.A. Seydibeyoglu, X.H. Zhao, K. Ong, J.A. Shatkin, S.S. Es-haghi, S. Bhandari, S. Ozcan, D.J. Gardner, Review on Hybrid Reinforced Polymer Matrix Composites with Nanocellulose, Nanomaterials, and Other Fibers, Polymers 15(4) (2023) 1-36.
  14. Z. Li, L.Y. Liu, Z. Wang, P. Gao, G.K. Li, Synthesis and Application of Mesoporous Materials: Process Status, Technical Problems, and Development Prospects: A Mini-Review, Energy & Fuels (2023) 3413-3427.
  15. J.S. Sun, J.Z. Yang, J.X. Ding, Controlled Synthesis of Polymers†, Chinese Journal of Chemistry 41(10) (2023) 1235-1248.
  16. M. Weerasinghe, O.J. Dodo, C.W.H. Rajawasam, I.O. Raji, S.V. Wanasinghe, D. Konkolewicz, N.D. Watuthanthrige, Educational series: turning monomers into crosslinked polymer networks, Polymer Chemistry 14(39) (2023) 4503-4514.
  17. C.X. Shi, L.T. Reilly, E.Y.X. Chen, Hybrid Monomer Design Synergizing Property Trade-offs in Developing Polymers for Circularity and Performance, Angewandte Chemie-International Edition 62 (2023) 1-16.
  18. G. John, S. Nagarajan, P.K. Vemula, J.R. Silverman, C.K.S. Pillai, Natural monomers: A mine for functional and sustainable materials - Occurrence, chemical modification and polymerization, Progress in Polymer Science 92 (2019) 158-209.
  19. F.Y. Pei, L.J. Liu, H.E. Zhu, H.X. Guo, Recent Advances in Lignocellulose-Based Monomers and Their Polymerization, Polymers 15(4) (2023) 1-19.
  20. H. Taniwaki, H. Kaneko, Retrosynthetic and Synthetic Reaction Prediction Model Based on Sequence-to-Sequence with Attention for Polymer Designs, Macromolecular Theory and Simulations 32(4) (2023) 1-9.
  21. J.C. Foster, J.T. Damron, H.H. Zhang, Simple Monomers for Precise Polymer Functionalization During Ring-Opening Metathesis Polymerization, Macromolecules 56(19) (2023) 7931-7938.
  22. R.Z. Pavlovic, S.A. Egner, L.C. Palmer, S.I. Stupp, Supramolecular polymers: Dynamic assemblies of "dancing" monomers, Journal of Polymer Science 61(10) (2023) 870-880.
  23. X.L. Li, K. Ma, F. Xu, T.Q. Xu, Advances in the Synthesis of Chemically Recyclable Polymers, Chemistry-an Asian Journal 18(3) (2023) 1-30.
  24. M. Kolár, J. Machotová, M. Hájek, J. Honzícek, T. Hájek, S. Podzimek, Application of Vegetable Oil-Based Monomers in the Synthesis of Acrylic Latexes via Emulsion Polymerization, Coatings 13(2) (2023) 1-16.
  25. E. Sharmin, F. Zafar, D. Akram, M. Alam, S. Ahmad, Recent advances in vegetable oils based environment friendly coatings: A review, Industrial Crops and Products 76 (2015) 215-229.
  26. X. Peng, K. Dong, Z.Y. Wu, J. Wang, Z.L. Wang, A review on emerging biodegradable polymers for environmentally benign transient electronic skins, Journal of Materials Science 56(30) (2021) 16765-16789.
  27. M.J.L. Tschan, E. Brulé, P. Haquette, C.M. Thomas, Synthesis of biodegradable polymers from renewable resources, Polymer Chemistry 3(4) (2012) 836-851.
  28. A. Romani, R. Suriano, M. Levi, Biomass waste materials through extrusion-based additive manufacturing: A systematic literature review, Journal of Cleaner Production 386 (2023) 1-19.
  29. R. Del Sole, G. Mele, E. Bloise, L. Mergola, Green Aspects in Molecularly Imprinted Polymers by Biomass Waste Utilization, Polymers 13(15) (2021) 1-30.
  30. F.H. Isikgor, C.R. Becer, Lignocellulosic biomass: a sustainable platform for the production of bio-based chemicals and polymers, Polymer Chemistry 6(25) (2015) 4497-4559.
  31. P. Vasudevan, D. Kumari, T.S. Kumar, MATERIALS FROM BIOMASS, Journal of Scientific & Industrial Research 42(1) (1983) 14-18.
  32. N. Katir, A. El Kadib, M. Dahrouch, A. Castel, N. Gatica, Z. Benmaarouf, P. Riviere, Amphiphilic polyesters derived from silylated and germylated fatty compounds, Biomacromolecules 10(4) (2009) 850-857.
  33. N. Katir, D. Andrade, M. Dahrouch, E. Díaz, N. Gatica, D. Hourlier, N. Reyes, M. Zarraga, Branched Polyesters from Germylated and Fatty Compounds, J Chil Chem Soc 61(1) (2016) 2784-2787.
  34. J.J. Fan, W. Liu, L.S. Cai, T.S. Jiang, Z.K. Wang, Castor oil-based multi-functional monomers and their application in polyamide design, Industrial Crops and Products 203 (2023) 1-8.
  35. J.P. Jain, M. Sokolsky, N. Kumar, A.J. Domb, Fatty acid based biodegradable polymer, Polymer Reviews 48(1) (2008) 156-191.
  36. H. Rodríguez-Tobías, J. Uzcátegui-Flores, F.J. Enríquez-Medrano, G. Morales, A.G. Martínez-Arellano, Further investigation on fatty acids-based methacrylate monomers: High temperature radical polymerization for obtaining copolymers and their blends with medium-oil alkyd resin for coatings, Progress in Organic Coatings 186 (2024) 1-10.
  37. B.R. Moser, S.C. Cermak, K.M. Doll, J.A. Kenar, B.K. Sharma, A review of fatty epoxide ring opening reactions: Chemistry, recent advances, and applications, Journal of the American Oil Chemists Society 99(10) (2022) 801-842.
  38. D. Andrade, C. Moya, F. Olate, N. Gatica, S. Sanchez, E. Díaz, E. Elgueta, M. Parra, M. Dahrouch, Soft amphiphilic polyesters obtained from PEGs and silicon fatty compounds: structural characterizations and self-assembly studies, Rsc Adv 6(45) (2016) 38505-38514.
  39. C.V. Rajput, N.V. Sastry, N.P. Chikhaliya, Vegetable oils based precursors: modifications and scope for futuristic bio-based polymeric materials, Journal of Polymer Research 30(4) (2023) 1-35.
  40. D. Andrade-Acuña, S.A. Sanchez, A. González-Jiménez, J.L. Valentin, A. Marcos-Fernández, M. Dahrouch, Obtention of biocompatible hydrogels containing PEGs/silicon fatty blocks with potential use as A controlled release system, React Funct Polym 173 (2022) 1-12.
  41. D. Andrade-Acuña, M. Dahrouch, S.A. Sanchez, E. Díaz, S. Mazières, OPTIMIZING THE STRUCTURE OF AMPHIPHILIC INVERTIBLE POLYMERS (AIPs) MADE OF PEGs AND FATTY COMPOUND SEGMENTS TO OBTAIN A SINGLE CRITICAL MICELLE CONCENTRATION, J Chil Chem Soc 65(4) (2020) 5011-5014.
  42. A. El Kadib, N. Katir, N. Marcotte, K. Molvinger, A. Castel, P. Rivière, D. Brunel, Nanocomposites from natural templates based on fatty compound-functionalised siloxanes, Journal of Materials Chemistry 19(33) (2009) 6004-6014.
  43. N. Katir, A. El Kadib, A. Castel, P. Rivière, M. Bousmina, Z. Benmaarouf, Organic-Inorganic Nano-Building Blocks via Hydrogermylation of Fatty Compounds, Current Organic Chemistry 15(19) (2011) 3544-3553.
  44. N. Katir, A.E. Kadib, A. Castel, P. Riviere, Z. Benmaarouf, New biosurfactants based on germylated fatty compounds, Applied Organometallic Chemistry 22(7) (2008) 402-406.
  45. A. Behr, A. Westfechtel, J.P. Gomes, Catalytic processes for the technical use of natural fats and oils, Chemical Engineering & Technology 31(5) (2008) 700-714.
  46. M. Dahrouch, A. Schmidt, L. Leemans, H. Linssen, H. Götz, Synthesis and properties of poly(butylene terephthalate)-poly(ethylene oxide)-poly(dimethylsiloxane) block copolymers, Macromol Symp 199 (2003) 147-162.
  47. J.G. Drobny, Handbook of Thermoplastic Elastomers, 2nd Edition, Handbook of Thermoplastic Elastomers, 2nd Edition, 2014, pp. 1-441.

Copyright @2019 | Designed by: Open Journal Systems Chile Logo Open Journal Systems Chile Support OJS, training, DOI, Indexing, Hosting OJS

Code under GNU license: OJS PKP