JOURNAL OF CHILEAN CHEMICAL SOCIETY

Vol 66 No 2 (2021): Journal of the Chilean Chemical Society
Reviews

DEVELOPMENT IN SYNTHESIS AND COATING APPLICATIONS OF POLYURETHANE

PDF
  • Dipti Vaya,
  • Tejpal Singh Chundawat,
  • Nidhi Verma
Dipti Vaya
Amity University, Haryana
Published June 12, 2021
Keywords
  • Coatings,
  • isocyanate,
  • polyol,
  • biobased
How to Cite
Vaya, D., Chundawat, T. S., & Verma, N. (2021). DEVELOPMENT IN SYNTHESIS AND COATING APPLICATIONS OF POLYURETHANE. Journal of the Chilean Chemical Society, 66(2), 5142-5148. Retrieved from https://jcchems.com/index.php/JCCHEMS/article/view/1719

Copyright (c) 2021 SChQ

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Abstract

Polyurethanes as one of the leading elastomers are explored in academics as well as in industry. These are segmented macromolecules having alternate sequence of soft and hard segments. Structure-property correlation between these segments has been extensively reported in the literature. PUs are used widely in coatings, varnishes, glues, foams, adhesives, sealants, automobile parts, synthetic leather etc. Its application in biomedical devices is also growing rapidly. It is therefore need to highlights the recent developments in this fast growing field. The present article is summarized the conventional and ecofriendly synthetic routes for the preparation of PUs. Conventionally, PUs was  synthesized by isocyanates route, later shortcoming of this method explore new synthesis method in which either used biobased polyol or non isocyanates route for preparation of ecofriendly PUs. The applications of different types of PUs coating in various fields are also highlighted in this review.

 

17191.jpg

PDF

References

  1. D.K. Chattopadhayay , and D.C.Webster , Prog Polym Sci, 34, 1068 (2009).
  2. L. Shen, J. Haufe , and M.K. Patel, Report of Utrecht University commissioned by European Polysaccharide Network of Excellence and European Bioplastics, Utrecht University, (2009).
  3. S.Curgul , I. Yilgor , E.Yilgor , B. Erman , and M.Cakmak . Macromolecules, 37, 8676 (2004).
  4. M. N. Belgacem , and A. Gandini , Elsevier: Oxford, (2008).
  5. D. K.Chattopadhyay , and K.V.S.N. Raju, Prog Polym Sci , 32, 352 (2007).
  6. I. P. Kro, Prog Mater Sci, 52, 915 (2007).
  7. J. J. Burdeniuc , and A. Z.Kamzelski , European patent , 1702913(2006).
  8. S. Roy , and K. K.Majumdar , Indian patent , 194604(2004).
  9. B. Begines , F. Zamora , I. Rofee , M. Mancera ,and J.A. Galbis , J Polym Sci Part A: Polym Chem, 49, 1953 (2011).
  10. C. Ferris , M .V. DePaz, and J.A. Galbis. J Polym Sci Part A: Polym Chem, 49, 1147 (2011).
  11. R. J. Gonza Lez-Paz, C. Lluch , G. Lligidias , J.C. Ronda, M. Galia , and V. J. Cadiz. Polym Sci Part A: Polym Chem, 49, 2407 (2011).
  12. A.Lee, and Y. Deng. Eur Polym J, 63, 67(2015).
  13. S. More, T. Lebarbe , L. Maisonneuve , B. Gadenne , C. Alfos, and J. Cramail. J Eur Polym, 49, 823(2013).
  14. M.S. Gaikwad, V. V. Gite, P. P. Mahulikar, D. G. Hundiwale, and O.S. Yemul. Prog Org Coatings, 86, 164 (2015).
  15. D.P. Pham, V.Lapinet , Y. Raoul ,and J. J. Robin. J Polym Sci Part A: Polym Chem, 52, 1597(2014).
  16. D.E. Rio, G. Lligads , C. J. Ronda,and V. Cadiz . J Polym Sci Part A: Polym Chem, 49, 3069(2011).
  17. M. Aung , Z. Yaakob , S. Kamarudin ,and L. C.Abdullah. Ind Crops Prod, 60, 177 (2014).
  18. Zhao, S. Xu, M. Adeel ,and S. Zheng . Polymer, 160, 82 (2019).
  19. S. Huo , C. Jin , G. Lui , J. Chen , G. Wu ,and J. Kong . Polym Degrad Stab, 159, 62 (2019).
  20. K. Mahmood , K. M. Zia, W. Aftab, M. Zuber, S. Tabasum , A. Noreen ,and F. Zia . Int J Biol Macromol, 113, 150(2018).
  21. L.B. Tavares, C.V. Boas, G.R. Schleder, A.M. Nacas, D.S. Rosa, and D.J. Santos. Express Polym Lett, 10, 927 (2016).
  22. Fu, Z. Yang , Z. Zheng , and L. Shen . Prog Org Coat, 77, 1241(2014).
  23. S. Thakur ,and N. Karak , Prog Org Coat, 76, 157(2013).
  24. K. Li , Y. Shen , G. Fei , H. Wang , and J. Li , Prog Org Coat,78, 146 (2015).
  25. H. Bakhshi, H. Yeganeh , S. M. Ataei, M.A. Shokrgozar, A. Yari, and S.N.S. Eslami, Mater Sci Eng C, 33, 153(2013).
  26. T.S. Velayuthama, W.H. Abd Majida, A.B. Ahmada, G.Y. Kangb, and S.N. Gan. Prog Org Coat, 66, 367 (2009).
  27. Philipp , and S. Eschig . Prog Org Coat, 74, 705 (2012).
  28. X. Kong, G. Liu ,and J.M. Curtis . Eur Polym J, 48, 2097(2012).
  29. S. Varaprasad , N. Ramanuj, and V.S.N Raju, Kothapalli, Prog Org Coat, 134, 91 (2019).
  30. S. Yingbin, H. Jialiang , X. Zhenxing , Z. Xing , F. Changqing, and Z. Chaoqun . Indust Crops Prod, 140, 111711 (2019).
  31. Zheng, Y. Zhao, J. Dong, Z. Ning ,L. Xin , W. Li, Z. Kai ,and G. Kai . RSC Advances, 93, 90771(2016).
  32. D. L. Nguyen, H.S. Le, M. Malin, J. Weisser, T. Walter, M. Schnabelrauch ,and J. Seppälä .Eur Polym J, 81, 129(2016).
  33. D. Charlotte, N. Kébir, A. Charvet,and F. Martin. J Polym Sci Part A: Polym Chem, 53, 1351 (2015).
  34. B. Ochiai, Y. Satoh, and T. Endo. J Polym Sci Part A: Polym Chem, 47, 4629 (2009).
  35. J. Guan, Y. Song, Y. Lin, X. Yin, M. Zuo, Y. Zhao, and X. Tao, Q. Zheng. Ind Eng Chem Res, 50, 6517 (2011).
  36. S. Matsumura, Y. Soeda, and K. Toshima. Appl Microbiol Biotechnol, 70, 12 (2006).
  37. O. Unverferth, A. Kreye ,and M.A.R. Prohammer . Macromol Rapid Comm, 34, 1569 (2013).
  38. O. Ihata, Y. Kayaki, and T. Ikariya. Angew Chem Int Ed, 43, 717(2004).
  39. D.V. Palaskar, A. Boyer , E. Cloutet , C. Alfos ,and H. Cramail . Biomacromol, 11, 1202 (2010).
  40. A.S. More, B. Gadenne, C. Alfos,and H. Cramail. Polym Chem, 3, 1594(2012).
  41. D. Simanta, and S.K. Dolui. Eur Polym J, 102, 161(2018).
  42. S.R. Da Rosa, B.C. Da Rosa, J.O. Gonçalves, L.A.A. Pinto, E.S. Mallmann, G.L. Dotto, and Int J Bio Macromole 2018, doi:10.1016/j.ijbiomac.2018.09.186.
  43. A.S. More, L. Maisonneuve, T. Lebarbe, B. Gadenne, C. Alfos,and H. Cramail. Eur J Lipid Sci Technol, 115, 61(2013).
  44. M.S. Kathalewar, P.B. Joshi, A.S. Sabnis, and V.C. Malshe. RSC Advances, 3, 4110 (2013).
  45. C.C. Huang, H.C.Lin,and A.S. Dai. J Polym Sci Part A: Polym Chem, 54, 802 (2016).
  46. E.K. Leitsch, W.H. Heath, and J.M. Torkelson. Int J Adhesion & Adhesives, 64, 1 (2016).
  47. S.Y. Lai, W.C. Tsai, W.H. Yang, P.G. Wang,and H.K. Wu. Mater Chem Phys, 117, 91 (2009).
  48. Markevicius, S. Chudhuri, C. Bajracharya, R. Rastogi, J. Xiao, C. Burnett,and Q.T. Chatesk. Prog Org Coat, 75, 319 (2012).
  49. A, Anand, D.R. Kulkarni, and V.V. Gite. Prog Org Coat, 74, 764(2012).
  50. J. Huber,and S. Mecking. Macromolecules, 43, 8718 (2010).
  51. C. Fang, X. Zhou, Q. Yu, S. Liu, and D. Guo, R. Yu. Prog Org Coat, 77, 61(2014).
  52. T. Michel, and R. Patrice. Prog Org Coat, 63, 182 (2008).
  53. N.G. Manvi,and N.R. Jagtap. J Disp Sci Technol, 31, 1376(2010).
  54. K.D. Lee, D.Z. Yang, B.H. Tsai,and S.R. Tsai. Polym Eng Sci, 49, 2264 (2009).
  55. M.S. Cakic, V.J. Stamenkovic, M.D. Djordjevic,and S.I. Ristic. Polym Degrad Stab, 94, 2015(2009).
  56. V.V. Gite, P.P. Mahulikar,and G.D. Hundiwale. Prog Org Coat, 68, 307 (2010).
  57. G.R. Pacios, J. Antonio, J. Rechea,and V. Cost. Prog Org Coat, 76, 1484 (2013).
  58. C. Zhao, L. Quantao, Y. Zheng, Guangfu Li, Z. Boxiao, Y. Yiming, Y. Changfeng,and X. Zushun. Prog Org Coat , 127, 194 (2019).
  59. N. Arshada, K.M. Zia, F. Jabeenb, M.N. Anjuma, N. Akrama,and M. Zubera. Int J Bio Macromol, 111, 485(2018).
  60. H.K. Shendi, I. Omrain, A. Ahmadi, A. Farahadian , N. Babanejad,and M.R. Nabid. Prog Org Coat, 82, 220(2016).
  61. G.P. Vanesa, A. José, R. Jofre, C. Víctor, C. Manuel, M. José, and M. Martín. Prog Org Coat, 76, 1484(2013).
  62. S. Bhoyate, M. Ionescu , D. Radojcic, P.K. Kahol , J. Chen, S.R. Mishra,and R.K. Gupta. J Appl Polym Sci, 135, 46027(2017).
  63. D. Wu, P. Zhao, and Y. Liu. Polym Eng Sci, 53, 2478(2013).
  64. W. Xing, H. Yuan, P. Zhang, H. Yang, L. Song,and Y. Hu. J Polym Res, 20, 234(2013).
  65. A. Zhang, Y. Zhang, F. Lv,and P.K. Chu. J Appl Polym Sci, 128, 347(2012).
  66. L.Zhang, M. Zhang, Y. Zhou, and L. Hu. Polym Degrad Stab, 98, 2784(2013).
  67. L. Zhang, M. Zhang, L. Hu,and Y. Zhou. Ind Crops Prod, 52, 380(2014).
  68. A. Gharehbagh ,and Z. Ahmadi , 2012. Polyurethane flexible foam fire behavior. Polyurethane. InTech p. 101. http://dx.doi.org/10.5772/47965.
  69. Wu, J. Li,and Y. Luo. Polym Degrad Stab, 123, 36(2016).
  70. Y.M. Shen, J.W. Chen, F.C. Kuan, C.H. Kuan, M.J. Yang,and L.C. Chiang. Mater Chem Phys, 173, 205(2016).
  71. K. Wu, L. Song, Z.Z. Wang,and Y. Hu . Microencapsulation Polym Adv Tech, 19,1914 (2008).
  72. J.X. Ni, L.J. Chen, K.M. Zhao, Y. Hu,and L. Song. Polym Adv Technol, 22,1824(2011).
  73. J. Hu, F. Zhang. Therm Anal Calorim, 118, 1561(2014).
  74. L.M. Gu, Z. Ge, M.H. Huang,and Y.J. Luo. J Appl Polym Sci, 132, 41288(2014).
  75. Wu, C.P. Chai, Z. Ge, J.L. Lin,and Y. Luo. J RSC Adv, 5, 97710(2015).
  76. G. Wu, J.Q. Li,and Y. Luo. J Polym Degrad Stab, 123, 36(2016).
  77. Abd El- Wahab , M. Abd El-Fattah, A.H. Ahmed, A.A. Elhenaway,and N.A. Alian. J Organomet Chem, 791, 99(2015).
  78. S. Bhoyate, M. Ionescu , P.K. Kahol,and R.K. Gupta. Ind Crop Prod, 12, 480(2018).
  79. H. Ding , K. Huang, L. Shouhai, X. Lin, X. Jianling,and L. Mei. J Anal Appl Pyrol, 128, 102(2017).
  80. M. Heinen, A.E. Gerbase,and C.L. Petzhold. Polym Degrad Stab, 108,76(2014).
  81. G.N. Manvi, A.R. Singh, R.N. Jagtap,and D.C. Kothari. Prog Org Coat, 75, 139(2012).
  82. J.O. Akindoyo, M.D.H. Beg, S. Ghazali, M.R. Islam, N. Jeyaratnam, and A.R. Yuavraj. RSC Adv,6, 114453(2016).
  83. T.T.X. Hang, N.T. Dung, T.A. Truc, N.T. Duong, B.V. Truoc, P.G. Vu,T. Hoang, and D.T.M. Than, M.G. Olivier. Prog Org Coat, 79, 68(2015).
  84. D. Kim, K. Jeon, Y. Lee, J. Seo, K. Seo, H. Han, and S.B. Khan. Prog Org Coat, 74, 435(2012)
  85. M.S. Lowry, D.R. Hubble, A.L. Wressel, M.S. Vratsons, F.R. Pepe,and C.R. Hegedus. J Coat Technol Res, 5, 233(2008).
  86. M.V. Criesta,and B. Riedl, P.M. Blanchet. Prog Org Coat, 69, 432(2010).
  87. M.V. Criesta,and B. Riedl, P.M. Blanchet. Prog Org Coat, 72, 755(2011).
  88. M. Rashvad, Z. Ranjbar,and S. Rastegar. Prog Org Coat, 71, 362(2011).
  89. S.K. Dhoke, A.S. Khanna,and T.J.M. Sinha. Prog Org Coat, 64, 371(2009).
  90. S.K. Dhoke,and A.S. Khanna. Corros Sci, 51, 6(2009).
  91. B. Ramezanzadeh, M.M. Attar,and M.A. Farzam. Prog Org Coat,72, 410(2019).
  92. E. Maya-Visuet , T. Gao , M. Soucek ,and H. Castaneda . Prog Org Coat, 83, 36 (2015).
  93. Z.W. Wicks, F.N. Jones , S. P. Pappas, and D. A. Wicks. Organic Coatings: Science and Technology 3rd ed, John Wiley & Sons New Jersey (2007).
  94. A. Duran , Y. Castro , M. Aparicio ,and A. Conde, D.J. Damborenea . J Int Mater Rev, 52, 175 (2007).
  95. P. Hammer , F.C.D. Santos, B.M. Cerruti, S.H. Pulcinelli,and C.V. Santili. Prog Org Coat,76, 601 (2013).
  96. P. Hammer, M.G. Schiavetto, F.C. Santos, A.V. Benedetti, S.H. Pulcinelli ,and C.V. Santili . J Non- Cryst Solids, 356, 2606 (2010).
  97. G. Lia, L. Fenga, P. Tonga,and Z. Zhai. Prog Org Coat, 90, 284 (2016).
  98. M.M. Jalili, S. Moradian, H. Dastmalchian,and A. Karbasi. Prog Org Coat, 59, 81(2007).
  99. G. Verma, A. Kaushik,and K.A. Ghosh. Prog Org Coat, 76, 1046 (2013).
  100. M. Sabzi, M.S. Mirabedini, Z.J. Mehr,and M. Atai. Prog Org Coat, 65, 222 (2009).
  101. Y.Chen , S. Zhou , H. Yang, G. Gua,and L.Wu . J Colloid Interface Sci, 279, 370 (2004).
  102. Y. Chen , S. Zhou , H. Yang ,and L.Wu . Macromol Mater Eng, 290, 1001(2005).
  103. W.C. Chou, S. Hsu , H. Chang , M. Tseng , R.H. Lin ,and Polym Degrad Stab, 91, 1017(2006).
  104. F. Farzaneh ,and M. Najafi . J Sci Islam Repub Iran, 22, 329 (2012).
  105. S. Semenzato , A. Lorenzetti , M. Modesti , E. Ugel , D. Hrelja ,and S. A. Besco . App Clay Sci, 44, 35 (2009).
  106. S. Wai , A.H. Sahrim , and S.A. Zubi . Adv Mater Res, 501, 8 (2012).
  107. M. Modesti, A. Lorenzetti , S. Besco , D. Hrelja , S. Semenzato, and R. Bertani . Polym
  108. Degrad Stab, 93, 2166 (2008).
  109. Ma, Z. Qi , and Y. Hu . J App Polym Sci, 82, 3611(2001).
  110. El-Sabbagh . Compos Part B: Eng, 57, 126(2014).
  111. Brinchi , F. Cotana , E. Fortunati , and J. M. Kenny . Carbohyd Polym, 94, 154 (2013).
  112. V. Alvarez , and A. Vazquez . Polym Degrad Stab, 84, 13(2004).
  113. D. Klemm , B. Heublein , H.P. Fink,and A. Bohn . Angewandte Chem Int Ed, 44,3358 (2005).
  114. A.I. Cordero, J.I. Amalvy, E. Fortunati , J.M. Kenny,and L.M. Chiacchiarelli. Carbohyd Polym, 134,110 (2015).
  115. J.M. Palimi, M. Rostami ,M. Mahadavinan ,and B. Ramezanzadeh . Prog Org Coat, 77, 1663 (2014).
  116. Rostmi , M. Mohseni ,and Z. Ranjbar . Int J Adhesion and Adhesive, 34, 24(2012).
  117. J.M. Palimi, M. Rostami , M. Mahadavinan ,and B. Ramezanzadeh . Prog Org Coat,77, 1935(2014).

Copyright @2019 | Designed by: Open Journal Systems Chile Logo Open Journal Systems Chile Support OJS, training, DOI, Indexing, Hosting OJS

Code under GNU license: OJS PKP